Vacuum sandblasting and shot peening machines, with or without cyclone, for light cleaning and surface preparation

High production versatility

The Lampugnani vacuum sandblasting and shot-peening machines exploit the physical principle "Venturi" for the projection of the material on the surface to be treated.
The abrasive is "projected" through a jet of compressed air that, through a high efficiency sandblasting gun, sucks the abrasive material through the mixer under the hopper or under the cyclone, if installed, and conveys it to the piece to be treated.
With this technology it is possible to use any type of grit, both spherical for machining of shot-peening (microspheres of glass, ceramics or metal), both angular for processing of sandblasting (corundum, metallic or plastic granules ).
The separation of exhausted particles and powders occurs through a mechanical system at cyclone and allows an optimal recovery of the abrasive which is put back into circulation.

Common features

  • Sturdy structure in reinforced and powder coated steel
  • Compact and modular
  • Prepared for Cyclone




Compact sandblasting machine for sandblasting and shot-peening small parts works


LC/E whitout cyclone

LC/S whitout cyclone

LC/05 with cyclone

Disegni tecnici


Industrial sandblasting and shot-peening machines with or without cyclone for various surface treatments

Rotating table + cyclone

LC/2 TR with cyclone

LC/3 TR with cyclone



Disegni tecnici


Medium and large sandblasting and shot-peening machines with rotating table for the treatment of bulky pieces and large productions

Extractable rotating table + cyclone

LC/2 TE with cyclone

LC/3 TE with cyclone



Disegni tecnici


Medium and large sandblasting and shot-peening machines with rotating table and extractable trolley on rails to facilitate the loading and unloading pieces, suitable for the treatment of heavy parts and / or complex shapes

Rotating basket

LC/550 CR whitout cyclone

LC/551 CR with cyclone



Disegni tecnici


Automatic sandblasting and shot-peening machines with a timed rotating basket for mass treatment of small parts


LC/2 TR 350 CR with cyclone

LC/600 RSV4



Disegni tecnici


Automatic sandblasting and shot-peening machines for mass treatment of large quantities of small and medium-sized parts





Ergonomics & Operator Comfort

Lampugnani Sabbiatrici stands out for its continuous research and development of innovative technical solutions, not only dedicated for the surface finishing and quality construction, but also aimed to offer solutions that are dedicated to the needs and care of the operator/user of the sandblasting/shot-peening machine.
The simple maintenance of each component for speed and safety, allows an harmonious use of the cabin in a lasting and continuous way.

Padded gloves

"LAMPO-COMFORT" Neoprene anti-fatigue gloves offered the maximum comfort and support during use of the sandblasting / shot-peening machine.

Gun support

Adjustable gun support permits to handle the parts to be treated under the sandblasting and / or shot-peening jet without holding the gun in hand.

Self-locking pedal

Pedal with step-by-step valve with interlocking function, in order to activate and maintain the sandblasting / shot-peening jet. This allows to operator to assume the correct posture without having to constantly remain with the foot on the pedal.

Filter cartridge replacement

The filter can be changed externally from the filter chamber for easy and safe maintenance for the operator.

Glass replacement

Quick change of internal protective glass with closing knobs positioned on the counter-frame with gaskets.

Gloves replacement

Replacement of gloves outside from the sandblasting / shot-peening chamber to avoid direct contact by the operator with the working area.


Discover the right solution for your work

To get the best results you need to use appropriate quality products. Lampugnani suggests a range of abrasives and non-abrasives products for sandblasting and shot peening treatments. Always in stock and ready for delivery, a full range products in different sizes, tested and guaranteed to be used on the entire range of Lampugnani Sandblasting Machines.

Shot peening products

Glass microbeads

Fields of application

Mechanical, Molds, Aeronautical, Deburring, Decoration, Surface Cleaning

Ceramic microbeads

Fields of application

Dental Technique, Medical, Food, Shot-peening

Metal grit

Fields of application

Foundries, Removal, Roughness

Main products for sandblasting

Brown-red corundum

Fields of application

Finishing, Restoration, Engraving, Surface roughness

White corundum

Fields of application

Finishes on Glass, Wood Restoration, Decoration, Medical, Dental Technique

Plastic granules

Fields of application

Molds, Surface Cleaning, Roughness


For your sandblasting machine only original spare parts "Lampoblast "