home-header

sistemi-pressione

Sandblasting and shot-peening machines with pressure system

High productivity and constant finishes over time

breadcrumb

The Lampugnani sandblasting and shot-peening machines have a working efficiency up to 5/6 times higher than the suction system.
The granules and the compressed air inside the pressure tank are projected directly and at high speed onto the piece to be treated, through the sandblasting/shot-peening lance.
Through the pressure regulator and the air/sand mixer it is possible to adjust both the firing power and the quantity of abrasive, to obtain an optimal result.

The used grit is recalled from the cabinet through the hopper located under the work surface and sent to the cyclone which separates processing waste and dust.
The still-suitable granules are reintroduced into the circuit, while the exhausted powders are filtered with appropriate filtration systems with certified cartridges, combined with the machine.

Main characteristics

  • High productivity
  • Finishes constant over time
  • Interior of the cabinet coated with high resistant polyurethane
  • Dust control cabinet
modelli-pressione

Rotating table + cyclone

LC/2 TR PRESS

LC/3 TR PRESS

Medium and large sandblasting and shot-peening machines with rotating table for the treatment of bulky pieces and large productions.

Extractable rotating table + cyclone

LC/2 TE PRESS

LC/3 TE PRESS

Medium and large sandblasting and shot-peening machines with rotating table and extractable trolley on rails to facilitate the loading and unloading pieces, suitable for the treatment of heavy parts and/or complex shapes

modelli-custom

graniglie-bottom

Discover the right solution for your work

To get the best results you need to use appropriate quality products. Lampugnani suggests a range of abrasives and non-abrasives products for sandblasting and shot peening treatments. Always in stock and ready for delivery, a full range products in different sizes, tested and guaranteed to be used on the entire range of Lampugnani Sandblasting Machines.

Shot peening products

Glass microbeads

Fields of application

Mechanical, Molds, Aeronautical, Deburring, Decoration, Surface Cleaning

Ceramic microbeads

Fields of application

Dental Technique, Medical, Food, Shot-peening

Metal grit

Fields of application

Foundries, Removal, Roughness

Main products for sandblasting

Brown-red corundum

Fields of application

Finishing, Restoration, Engraving, Surface roughness

White corundum

Fields of application

Finishes on Glass, Wood Restoration, Decoration, Medical, Dental Technique

Plastic granules

Fields of application

Molds, Surface Cleaning, Roughness

ricambi-bottom

For your sandblasting machine only original spare parts "Lampoblast "

Guns

Nozzles

Gloves

Filters

Pneumatic

Cyclons

home-footer
pager